PaloAlto Networks Prisma SD-WAN ION 2000, Справочник по аппаратуре

Страница: 29 / 38

ION 2000 HARDWARE REFERENCE | Install ION 2000
29
©
2021 Palo Alto Networks, Inc.
Rack Mount the ION 2000
Rack-mount the ION 2000 on a standard 19 inch rack. In the optional rack-mount kit, there are two
identical L-shaped brackets that is attached to either side of the ION 2000 with two (2) screws.
After you attach the brackets, mount the ION 2000 on to any standard 19 inch rack using three appropriate
screws.
STEP 1 | Gather the L-shaped rack-mounting brackets.
STEP 2 | Locate the two (2) screw holes on each side of the device.
STEP 3 |
Attach the L-shaped brackets to the screw holes on either the front or back of the device.
STEP 4 | Ensure that the screws are securely tightened into the brackets.
STEP 5 | Attach the L-shaped rack-mounting brackets to a standard 19 inch rack with the long-threaded
nails.