PaloAlto Networks PA-7000 Series Скачать руководство пользователя страница 72

Страница: 72 / 220

PA-7000 Series Firewall Installation

STEP 5 |

Attach the rack-mount brackets to the rack using rack-mount screws (not provided) and

tighten with a screwdriver. Install four screws on each side of the chassis.

Install the PA-7050 Firewall in the Front-Mount Position

The following procedures describe how to install the PA-7050 firewall in a front-mount position.

The chassis ships with the rack-mount brackets in the mid-mount position, so you will need to

move the brackets to the front-mount position as described.

The PA-7050 chassis and the front slot cards (SMC, LPC or LFC, NPC) ship in separate

boxes and it is recommended that you install the cards after you rack-mount the chassis.

This will prevent any damage to the cards that could occur during rack mounting and will

reduce the chassis weight. To further reduce the chassis weight, remove the fan trays and

front power supplies.

STEP 1 |

Read

PA-7000 Series Firewall Rack Install Safety Information

PA-7000 Series Firewall Hardware Reference

2023 Palo Alto Networks, Inc.

Содержание PA-7000 Series





























































































































































































































Результаты поиска

Содержание PA-7000 Series

Отзывы:

Бренды по названию

Популярные бренды

PaloAlto Networks PA-7000 Series, Справочник по аппаратуре

Результаты поиска

Содержание PA-7000 Series

Отзывы:

Бренды по названию

Популярные бренды