PaloAlto Networks PA-220R, Справочник по аппаратуре

Страница: 17 / 40

PA-220R Firewall Overview
PA-220R Status LEDs
The following table describes how to interpret the status LEDs on the PA-220R firewall.
LED Descripon
PWR (Power) • Green —The firewall is powered on.
• Off —The firewall is not powered on or an
error occurred with the internal power
system (for example, power is not within
tolerance levels).
ALRM (Alarm) • Red —A hardware failure, such as a power
supply failure, a firewall failure that caused
an HA failover, a drive failure, or if the
hardware overheated and exceeded the
high temperature threshold.
• Off —The firewall is operang normally.
STAT (Status) • Green —The firewall is operang normally.
• Yellow —The firewall is boong.
HA (High Availability) • Green —The firewall is the acve peer in an
acve/passive configuraon.
• Yellow —The firewall is the passive peer in
an acve/passive configuraon.
• Off —HA is not operaonal on this firewall.
In an acve/acve configuraon,
the HA LED indicates HA status
for only the local firewall and has
two possible states; it does not
indicate HA connecvity of the
peer. Green indicates that the
firewall is either acve-primary or
acve-secondary and off indicates
that the firewall is in any other
state (for example, non-funconal
or suspended).
TEMP (Temperature) • Green —The firewall temperature is normal.
• Yellow —The firewall temperature is outside
tolerance levels.
PA-220R Next-Gen Firewall Hardware Reference 17
©
2021 Palo Alto Networks, Inc.