PaloAlto Networks ION 9200, Справочник по аппаратуре

Страница: 22 / 24

Install the ION 9200
Install the ION 9200 Using Four-Post Rack Mount Kit
The following procedure describes how to install the ION 9200 in a 19” four-post equipment rack
using the four-post rack kit.
STEP 1 | Attach one rack-mount bracket to each side of the ION 9200 in the front-mount position
using four #6-32 x 5/16” screws for each bracket and torque to 9 in-lbs.
STEP 2 | Attach one rack-mount rail to each side of the device using two #6-32 x 5/16” screws for
each rail and torque to 9 in-lbs.
STEP 3 | Hold the device in the rack and secure the front rack-mount brackets to the front rack-posts
using two screws for each bracket. Use the appropriate screws (#10-32 x 3/4” or #12-24 x
ION 9200 Hardware Reference 22
©
2022 Palo Alto Networks, Inc.