palmOne LifeDrive, Начало работы

Страница: 123 / 200

LifeDrive from palmOne
114
CHAPTER 8 Your Wireless Connection
Setting up a Bluetooth phone connection
To set up a phone connection, you must have a GSM or GPRS mobile phone
enabled with data services.
0O
1
Select Bluetooth controls on the status bar.
2
Select Setup Devices, select Phone Setup, select Phone Connection, and then
select Next.
3
Select the phone you want to connect to:
a. Select the Manufacturer and Model pick lists, select the correct entries for
your phone, and then select Next.
If the phone does not appear on the list, check for phone compatibility at
http://www.palmOne.com/us/support/downloads/phonelink.html .
b. The Connection Setup screen displays all Bluetooth phones within range.
If your phone is not listed on the discovery results, check whether your
phone is Bluetooth discoverable. Select Find More to search again.
c. Select the phone you want, select OK, and then select Next again.
Not all features are available if your specific phone model is not in
the pick list.
Continued
Before You Begin
[ ! ]
If you have an IR phone,
you must download the
Phone Link application
from the web. Go to
http://
www.palmOne.com/us/
support/downloads/
phonelink.html
to
download the software.
Tip
If you receive a message
that your phone is not
ready to accept a
connection, check to
make sure that your
phone is prepared to
make a Bluetooth
connection. See the
instructions included with
your phone.
IMPORTANT
[
!
]
NOTE