Palmgren TU 2506, Руководство по эксплуатации

Страница: 10 / 98

Page 10
TU2506
ǀ
TU2807V US
1.5.2 Authorized personnel
WARNING!
Incorrect use and maintenance of the machine constitutes a danger for personnel,
objects and the environment.
Only authorized personnel may operate the machine!
The only personnel authorized to use this machine and perform maintenance on it are trained
and instructed technical staff working for the operator and manufacturer.
1.5.3 Obligations of the operator
The operator must instruct staff at least once a year on

all safety standards that apply to the machine,

operation,

accredited technical guidelines.
The operator must also

check staff's understanding,

document training/instruction,

require staff to confirm participation in training/instruction by means of a signature,

check whether the staff are aware of safety and of dangers in the workplace and whether
they observe the operating manual.
1.5.4 Obligations of the user
The user must

have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to manipulate the machine.
1.5.5 Additional qualification requirements
For work on electrical components or equipment there are additional requirements:

This work must only be carried out by a qualified electrician or person working under the
instructions and supervision of a qualified electrician.

Before carrying out work on electric components or operating units the following measures
must be taken, in the order given.

Disconnect all main electrical power.

Ensure that the machine cannot be turned on again.

Check that there is no voltage.
1.6 User positions
The user must stand in front of the machine.
1.7 Safety measures during operation
CAUTION!
Risk due to inhaling health hazardous dusts and mist.
Depending on the material being processed and any additional dusts and mist in the
work area, conditions might impair your health.
Make sure that the generated health hazardous dusts and mist are safely removed at the
point of origin and are collected and/or filtered from the working area. Use an
appropriate dust collection/filter unit.