MANUAL
PGA05
Palmer
Musical Instruments
The ADIG-ST is one of a special series devoted to the direct injection of guitar amplification.
A DI box should normally transfer a linear signal through its circuitry.
The guitar amplifier's loudspeaker, however plays a very important role in forming the
electrified sound, and therefore must be taken into account when replacing the miked-up
sound. While the ADIG-LB has a built-in Load Box - loudspeaker substitute - for connecting
directly to the amplifier, the ADIG-ST differs in that it is effectively a two channel (stereo)
DI box. This means that it can not only accept the full power output of an amplifier, but also
a preamplifier or multieffect line output signal.
