Palm TM Zire Zire 71, Руководство пользователя

Страница: 217 / 270

Setting Communication Preferences
207
3.
Tap Edit.
4.
Tap Details.
5.
Tap the Speed pick list and select the appropriate speed.
6.
Enter the initialization string supplied by the documentation for the modem in
your mobile phone, if necessary.
7.
Tap OK.
8.
Tap OK again to save the configuration.
After you create the configuration, you need to set up the HotSync Manager of
your Desktop application and the HotSync application of your handheld to
perform a modem HotSync operation.
Network Preferences
You can use the software that is included in the handheld operating system to
connect with Internet service providers (ISPs) or dial-in (remote access) servers,
using a mobile phone or optional modem accessory. Your mobile phone must be
equipped with either an IR port or a serial cable that connects to your handheld’s
universal connector. You also need an ISP account or corporate remote access
account and a mobile phone carrier account that supports dial-up connections, or
a mobile phone carrier account with high-speed wireless data network services.
To use the e-mail software included with your handheld, you must create a
configuration in Connection Preferences and then create Network Preferences
settings. See
“Connection Preferences” earlier in this chapter for a complete
explanation of how to define Connection configurations that enable your handheld
to communicate with remote devices.
After you configure both the Connection and Network Preferences, you can
establish a PPP (Point-to-Point Protocol) connection with your ISP or dial-in server.
You can do this either by using menu commands from the Network Preferences
screen or by using a third-party application.
NOTE
The Network Preferences settings enable to connect to your ISP or dial-in
server with applications that support viewing the transmitted data. Visit the web site
www.palm.com for information on third-party applications that take advantage of
TCP/IP.
Tap here