Palm Handhelds m100, Руководство пользователя

Страница: 151 / 232

Chapter 6 Page 143
3. From the User pop-up menu, select the appropriate user name.
4. Select an application in the Conduit list.
5. Click Conduit Settings.
6. Click the direction in which you want to write data, or click Do
Nothing to skip data transfer for an application.
Note:
Changing the HotSync setting from the default affects only
the
next HotSync operation. Thereafter, the HotSync
Actions revert to their default settings. To use a new setting
on an ongoing basis, click Make Default. Thereafter,
whatever you selected as the default setting is used for
HotSync operations.
7. Click OK.
8. Repeat steps 4 through 7 to change conduit settings for other
applications.
9. Close the Conduit Settings window.
IR HotSync operations
Your handheld is equipped with an infrared (IR) port that supports
the IrCOMM implementation of the standards for infrared
communication established by the Infrared Data Association (IrDA).
This means that not only can you beam data to another Palm OS
handheld that’s equipped with an IR port, but you can also beam data
to a mobile phone and any other device that supports the IrCOMM
implementation of the IrDA standards.
Most importantly, you can use the IR port to perform HotSync
operations; you don’t need your cradle/cable. This is especially useful
if you travel with an infrared-enabled laptop. You simply enable
infrared communication on your laptop and handheld and follow the
steps in “Performing an IR HotSync operation” later in this section.