Palm Bluetooth Card Скачать руководство пользователя | Manualshive

Страница: 77 / 86

background image

73

Product Regulatory and Safety Information

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

■

Reorient or relocate the receiving antenna.

■

Increase the separation between the equipment and receiver.

■

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

■

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC rules.

CAUTION

Changes or modifications not covered in this manual must be approved in writing by the

manufacturer’s Regulatory Engineering Department. Changes or modifications made without written
approval may void the user’s authority to operate this equipment.

Palm™ Bluetooth Card

Tested to Comply

With FCC Standards

FOR HOME OR OFFICE USE

Responsible Party:

Palm, Inc.
5470 Great America Parkway
Santa Clara, California 95052
United States of America
(408) 878-9000

«
...
75
76
77
78
79
...
»

Содержание Bluetooth Card























































































Отзывы:

Нет отзывов

Похожие инструкции для Bluetooth Card

Бренд: AT&T Страницы: 70

Бренд: Janam Страницы: 66

CrossWords Puzzle Solver CW-50

Бренд: Franklin Страницы: 20

Бренд: Baby Lock Страницы: 50

Бренд: Janam Страницы: 12

Бренд: Unitech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды