ITALIANO
ENGLISH
FRANÇAIS
004778560 - 17/11/2020
53
The pellet stove is not a cooking device.
Store this instruction manual, which is an inte-
gral part of the stove, for its entire service life. If
the stove is sold or transferred to another user,
always make sure it is accompanied by the prod-
uct booklet.
In case of loss, contact the manufacturer or au-
thorised retailer to receive another copy.
Maintenance
Maintenance operations must be carried out by
qualified personnel authorised to work on the
appliance to which this manual refers.
Responsibility for the works of installation
Responsibility for the works carried out for the in-
stallation of the appliance cannot be considered
to be taken on by Palazzetti; it is and remains the
responsibility of the installer, who is responsible
for carrying out the checks relating to the flue,
the air intake and how right the proposed instal-
lation solutions are.
1.7 Compliance
The appliances covered by this manual comply
with the legislative provisions of the following
European directives:
2014/30/EU: Electromagnetic Compatibility
Directive
2014/35/EU: Low Voltage Directive
2017/2102/EU: RoHS Directive
2009/125/EC: Eco-Design Requirements
for Energy-Related Products
Directive
2014/53/EU: RED (Radio Equipment
Directive)
REGULATION (EU) N. 305/2011 (CPR)
REGULATION (EU) 2015/1185 (ECODESIGN)
The following harmonised standards and/or reg-
ulations have been applied:
EMCD:
- EN 55014-1:2017
- EN 61000-3-2:2015
- EN 61000-3-3:2014 /EC:2016
- EN 55014-2:2015
EMF:
- EN 62233:2008 / EC:2008
LVD:
- EN 60335-1:2013 /EC:2014 /A11:2015 /A13:2017
- EN 60335-2-102:2007 /A1:2011
CPR:
- EN 14785:2006
1.8 Responsibility of the
manufacturer
With the delivery of this manual, Palaz-
zetti declines all responsibility, both civil
and criminal, direct or indirect, due to:
• installation that does not comply with stand-
ards in force in the country and with safety
directives;
• partial or total non-compliance with the in-
structions contained in this manual;
• installation by unqualified and/or untrained
personnel;
• use not in compliance with the safety direc-
tives;
• modifications and/or repairs carried out on the
appliance that are not authorised by the man-
ufacturer;;
• lack of maintenance;
• exceptional events.