Palazzetti Ecofire, Инструкция по установке, эксплуатации и обслуживанию

Страница: 49 / 164

cod. 00 477 1480 - 12/2012 - Palazzetti - PN - Italy 49/164
ENGLISH
INSTALLATION
must be connected to the second room.
It is prohibited to connect air intake
B to kitchens,
bathrooms or bedrooms.
In this type of installation the external air intake
V
is not necessary.
)
Depending on the method adopted, we recommend
you mark the position of the air intakes on the
š
the trial assembly.
6.3 ELECTRIC FAN APPLICATION AND
CONNECTIONS
)
* < "
6.3.1 Preparing the ducts
¡š œ{w„
pull it until it is about 150 cm long.
While pulling the pipe, turn it from both ends in
opposite directions.
Cut the pipe with a knife or scissors at the required
length.
6.3.2 Air fan
The air fan (1) is located in the lower rear part of
the stove (Fig. 6.3.2).
6.3.3 Connecting the fan
† œ
œ œš
having sealed them with silicone.
Apply mortar between the pipes and the wall.
"
Failing this, when the fan is started, it will create a
strong vacuum which will draw back smoke from
the brazier grille with consequent exit of smoke
through the hot air outlets.
6.3.4 Installation of a room temperature probe
DUCTED ECOFIRE FOR BUILDING IN
The installation of the probe must be effected on
œš
air at 30 cm from the inlet of the convection fan.
For installation, follow the following steps (Fig.
6.3.3):
1) unscrew the probe holder (a) from the rear of
the stove
ƒ š œ
intake of the fan (b)
3) reassemble the probe with the probe holder, on
š !
Fig. 6.2.3
A
B
C
Fig. 6.3.1
Fig. 6.3.2 1
Fig. 6.3.3
a
b