Palax KS45S, Руководство пользователя

Страница: 32 / 38

32
Palax KS45s Translation 1-2017
6.7. Structure of the detent end and the correct order of parts. Fig. 6.8

Keep the cover E of the detent end depressed while undoing the valve screws F, as the stiff
springs can throw the cover off. This can also make the springs and balls of the detent fly off.

To ensure that the small balls C stay properly in position during assembly of the detent end B,
apply a small amount of Vaseline to the holes in the side of the detent end B. Ensure that part
A comes into the correct position, as illustrated in the picture.
6.8. Discharge conveyor

The conveyor is equipped with hydraulic
transmission

The conveyor chains are equipped with
automatic spring tensioning.

The bearings at the top of the conveyor
are lubed-for-life so they do not require
any maintenance.

The bearing at the lower end of the
conveyor shall be lubricated every 100
hours.