Palax Active TR/TR, Инструкция по эксплуатации

Страница: 11 / 44

11
Palax D270 Active Translation 1-2017

Only cut one log at a time.

Danger! Stay away from moving parts.

Never leave the machine unattended while it is running.
1.8. Noise emission and vibration

Equivalent continuous A-weighted sound-pressure level at the workstation is 89.5 dB (A) and the
sound power level is 100.5 dB (A).

The vibration emission values do not exceed the limit 2,5m/s 2 .
1.9. Responsibilities of the operator

The machine may only be used to produce firewood.

All the safety-related devices are necessary to ensure a sufficient level of safety.

The Palax Active is a very safe machine, provided that the instructions supplied are properly
followed, the regular maintenance routines are duly executed, and the work is carried out
without haste.

It is the responsibility of the operator to ensure before the work is started that all the safety-
related devices are in perfect order and the machine has been serviced in a due manner.

The operator is responsible for ensuring that no one else is subjected to any danger.

Modifying the construction of the machine is prohibited.

The machine must never be operated under the influence of alcohol or drugs.

As the operator, remember that you are responsible for any injuries caused if safety-related
devices have been removed from the machine.
1.10. Operating conditions

Always place the machine on as level a surface as possible.

Prevent risks, such as slipping in winter, by organising the work site in a due manner.

When starting the machine in severe frost, allow it to idle at about 1/4 of the maximum speed
for about 5 to 10 minutes in order to warm up the oil and make it less viscous.

Only operate the machine in an adequately lit space.

It is recommended that a suitable stand be purchased or made that enables the trees to be
processed where the logs are ready at the level of the in-feed deck. Hence, unnecessary lifting
may be avoided and the work can proceed much faster. We recommend using the Palax Log log-
stand.

The most suitable temperature range for operation is approximately - 20 to +30 degrees
Centigrade. Otherwise, the weather conditions do not set any restrictions on the operation.

Make sure that no other people, especially children, are present inside the operating range.

Never use the machine indoors, owing to the risk of dust generation or the danger of exhaust
gases.