2
For your safety
5200-en_V2.0_06/20
7
2
For your safety
2.1
Hazards and safety instructions
Electric shock
Mains voltage is applied to the electrical connections. This can lead to elec-
tric shock.
1.
Work on the electrical installation may only be performed by special-
ized personnel.
2.
Work on the electrical components may only be performed by special-
ized personnel.
3.
Ensure that live components do not get wet.
4.
Observe the applicable regulations.
Safe operation of the de-
vice
1.
Operate the device only when it is connected to an electrical outlet with
residual current circuit breaker.
2.
Only operate the device with the insulation and/or casing fully installed.
3.
Make sure that the housing and/or the casing on the device is undam-
aged, complete, and correctly installed.
Safe use of the device
1.
Do
not
use the device in a flammable or explosive environment, e.g.
rich in hydrogen or oxygen.
2.
Do
not
use the device with flammable or explosive carrier gases, e.g.
rich in hydrogen or oxygen.
