WK-WX Series User Guide
9
Network
LAN
This page allows you to edit the AP’s LAN settings. To configure the AP’s IP
address, you can configure it with a static IP address or obtain an IP address
automatically by using a DHCP client.
To open the LAN menu:
1.
Go to Network > LAN.
2.
Change settings, as needed:
•
LAN
o
IP Network Setting: Static addresses require an IP Address, Subnet
Mask, and Default Gateway.
Static address
is the recommended
setting. However, you may select DHCP client if your network has a
router.
•
Spanning Tree Protocol (STP) Settings: STP prevents bridge loops. By
default, this feature is enabled.
