WA-2200 Series User Guide
3
Introduction
As the central component of your wireless network, the WA-2200 802.11ac 2x2 Wave 2
Access Point provides you with high-speed, high-range wireless 8012.11ac networking. The
AP broadcasts on both the 2.4 GHz and 5 GHz bands so that select devices can choose
their preferred source of wireless connectivity, improving the overall stability, reliability,
and performance of the wireless network.
System requirements
Minimum system requirements:
•
PoE switch or injector, or an AC power adapter (not included)
•
A computer with an Ethernet port (for first AP setup).
Hardware installation
For hardware installation and first-time startup instructions, see the
Quick Start Guide
found
in the box.
Default settings and credentials
•
IP address: IP will be automatically assigned by router if a DHCP server is detected or,
if no DHCP server is detected, the default IP address will be automatically set to
192.168.1.21.
•
Username/Password (default): admin/password
•
SSIDs (default): Pakedge_Main (5 GHz) and Pakedge_Alt (2.4 GHz)
Security/password: WPA2-PSK/pakedgewireless
•
Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password:
WPA2/pakedgeguest
•
Transmit power: 13 dBm for 2.4 GHz and 18 dBm for 5 GHz.
First-time login
The first time you log in, you are brought to the
Configure
tab. Here you can change your
username and password (strongly recommended), specify the device’s network name and
physical location, set the Country Code, and create or hide wireless networks.
For BakPak Lite setup instructions, see the
WA-2200 Quick Start Guide
.
Note: For APs sold in the U.S. and Israel, the Country Code will be preconfigured and
locked. For units sold in the rest of the world, the Country Code will be blank and
must
be configured on the
Configure
tab during first-time setup.
