PairGain T1LIE044AA, Быстрое руководство по установке, Страница: 10 / 20

Section 350-231-134 Revision 01
8 HLU-231 List 3D
System Settings
The asterisks (*) in the following system settings descriptions indicate the
factory default settings.
HLU-231 List 3D System Options
Mode Selection Description
EQL EXT* Selects extended equalizer.
0 Sets the internal equalizer to DSX-1 for 0 - 133 feet.
133 Sets the internal equalizer to DSX-1 for 133 - 266 feet.
266 Sets the internal equalizer to DSX-1 for 266 - 399 feet.
399 Sets the internal equalizer to DSX-1 for 399 - 533 feet.
533 Sets the internal equalizer to DSX-1 for 533 - 655 feet.
ZBTS ON Selects the Extended Superframe (ESF) frame ZBTSI
mode.
OFF* Deslects the ESF frame ZBTSI mode.
LPBK DIS Configures the HLU-231 to ignore the 2 in 5 Smart-Jack
loopback command.
ENA* Enables the HLU-231 to respond to the 2 in 5 Smart-Jack
loopback command.
LBTO NONE Disables automatic time-out cancellation of all loopbacks.
20 Sets automatic cancellation of all loopbacks to 20 minutes
after initiation.
60 Sets automatic cancellation of all loopbacks to 60 minutes
after initiation.
120* Sets automatic cancellation of all loopbacks to 120
minutes after initiation.
ALM DIS* Opens the relay alarm contacts, if closed, and prevents
another relay alarm closure from occurring.
ENA Enables activation of the minor alarm relay when a minor
alarm condition occurs.