150-204-111-01, Revision 01
Installation
HRE-204 List 1A and List 2A
April 7, 2000
5
I
NSTALLATION
This section provides information on installing and mounting the HRE-204.
I
NSTALLATION
K
IT
•
two mounting screws
•
two anchor nuts
M
OUNTING
O
PTIONS
The HRE-204 is suitable for mounting on a desktop or on a wall. Before setting up the equipment, select a location
that provides appropriate security.
Mounting the HRE-204 on a Desktop
The remote enclosure includes four inverted dimples in the bottom plate for desktop mounting. The dimples create
an air gap between the bottom of the enclosure and the surface of the desk. This prevents overheating by providing
air flow through the enclosure. Do not block the air flow from the bottom of the unit.
Regardless of where the HRE-204 is mounted, PairGain recommends that the frame ground
lug be connected to earth ground according to the grounding recommendations found in
Section 9 of Bellcore’s GR-1089-DEC, 1996. See
“Power and Grounding” on page 9
for more
information.