PairGain 150-1592-02, Руководство пользователя

Страница: 21 / 70

150-402-102-01, Revision 01 Installation
HRU-402 List 2 July 27, 1998 13
8 When the HRU is looped back towards the CPE or CLOC, the LBK LED
blinks yellow at 1 time per second.
9 When HiGain is in special loopback ARMED state, the LBK LED blinks
yellow at four times a second.
F
RONT
P
ANEL
M
ESSAGES
The following table lists and describes front panel messages that may appear
on the ASCII terminal menus while the HRU-402 List 2 is connected to the
HLU-231 List 8.
Table 4. HLU-231 List 8 Four-Character Front Panel Messages
Message Name Description
CREM Customer
Remote
Loopback Signal from customer is looped back to customer at the
HLU-231.
NLOC Network Local
Loopback DSX signal is looped back to DSX at the HLU.
CLOC Customer Local
Loopback Signal from customer is looped back to customer at the
HRU.
NREM Network Remote
Loopback DSX signal is looped back to DSX at HRU.
SMJK Remote
SmartJack
Loopback Signal from DSX is looped back at HRU by the HRU
SmartJack.
TLOS Transmit Loss
Of Signal HRU is in a logic loopback state caused by a loss of its T1
input from the CI, if enabled at the HRU by its TLOS switch
option.
FERR Framing Bit
Error Occurred Framing bit error occurred at HLU T1 input.
LBPV Local Bipolar
Violation A bipolar violation received at the T1 input to the HLU-231.
SIG 1 or 2 Signal 1 or
Signal 2 The HLU and HRU or 1st Doubler transceivers are trying to
establish contact with each other on Loops 1 or 2 of
span 1.
S2L1 or 2 Signal 2 Loop 1
or Loop 2 The 1st Doubler and either HRU or 2nd Doubler
transceivers are trying to establish contact with each other
on loops 1 or 2 of span 2.