manualshive.com logo in svg

PairGain 150-1141-05, Руководство пользователя, Страница: 77 / 78

Поделиться
Скачать
PairGain 150-1141-05 Скачать руководство пользователя страница 77

 

C

ERTIFICATION

 

AND

 W

ARRANTY

FCC C

LASS

 A C

OMPLIANCE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be required to correct the interference at his own expense.

L

IMITED

 W

ARRANTY

LIMITED WARRANTY: Seller warrants its Products to be free from defective material and faulty workmanship for a period of five (5) years 
during normal use from date of shipment by Seller (except for Products known as Avidia which are warranted for one (1) year on hardware, 
ninety (90) days on software, Products known as PG-2 which are warranted for two (2) years and for HOM and EVAL board or chip level 
Products which are warranted for one (1) year). Seller's obligations under this warranty are limited to replacing or repairing, at Seller's option, 
any such Product which is returned during the warranty period in accordance with Seller's instructions, all transportation charges prepaid by 
Buyer, and which Product, in Seller's sole opinion, is determined to be defective upon examination at its factory. Transportation charges for 
the return of all repaired or replaced Product from Seller's facility will be paid by Seller. Seller may use reconditioned parts or Products for 
such repair or replacement. This warranty applies only to Seller products sold directly by its employees, or indirectly through its authorized 
agents, distributors, or resellers. This warranty does not apply to any Product which has been repaired, worked upon or altered by persons not 
so authorized by Seller or in Seller's sole judgment has been subject to misuse, negligence, accident, fire or other casualty, or operation beyond 
its design range. This warranty also does not apply to any of Seller's Products which have been connected, installed, used, adjusted or in which 
operating materials have been installed or materials assembled otherwise than in accordance with the instructions furnished by Seller. Products 
repaired or replaced by Seller under warranty will continue to be warranted according to the provisions of this Section 9 for the duration of 
the initial warranty period or for six (6) months after repair or replacement, whichever is longer. Without impacting the form, fit, or function 
of its Products, Seller reserves the right to make changes in the design or construction of any of its Products at any time without incurring any 
obligation to make any changes whatsoever on units previously purchased, nor shall any such changes create any implication whatsoever that 
any Product manufactured or furnished without such changes is in any way defective. EXCEPT AS TO TITLE AND INFRINGEMENT (AS 
SET FORTH IN SECTION 8 ABOVE), THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, 
STATUTORY, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCTS 
SHALL BE ONLY AS STATED HEREIN. NO OTHER REPRESENTATIVE OR PERSON IS AUTHORIZED TO REPRESENT OR 
ASSUME FOR SELLER ANY LIABILITY IN CONNECTION WITH THE SALE OF SELLER'S PRODUCTS OTHER THAN AS SET 
FORTH HEREIN.

R

ETURNS

PairGain continues to repair faulty modules beyond the warranty program at a nominal charge. Contact your PairGain sales representative for 
details and pricing. Refer to the instructions under 

“Returns” on page 66

 for complete return instructions.

M

ODIFICATIONS

Any changes or modifications made to this device that are not expressly approved by PairGain Technologies, Inc. may void the user's warranty.

All wiring external to the products should follow the provisions of the current edition of the National Electrical Code.

S

TANDARDS

 C

OMPLIANCE

The HLU-388 List 5 has been tested and verified to comply with the applicable sections of the following standards.

•

GR 63-CORE - Network Equipment-Building System (NEBS) Requirements: Physical Protection

•

GR 1089-CORE - Electromagnetic Compatibility and Electrical Safety

For technical assistance, refer to 

“Appendix D - Product Support” on page 65

.

Содержание 150-1141-05















































































Отзывы:

Нет отзывов