2501 Ludelle Street
Fort Worth, Texas 76105
817-244-6898
phone
817-244-4024
fax
800-423-9696
orders
E-Mail:
WebSite:
http://www.painlessperformance.com
Installation Instructions
For
50313, 50314, 50315, 50316, 50317 and 50318
Universal Switch Panels
The 50313, 50315 and 50317 switch panels are designed to be mounted in the dash using
the screws provided.
The 50314, 50316 and 50318 switch panels are designed to be mounted in the box
provided. The assembled box and panel may be attached to the roll cage or any location
convenient for operation. The box may be attached to the roll cage with regular hose
clamps by routing the clamp through the slots precut in the back of the box and then
around the roll bar. No cutting or welding is necessary.
The large red wire, that has been spliced several times, is included in the kit to provide
power to all the switches. The spliced black wire is included to provide a ground to all
the switch Lights.
Individual wires with terminals on one end are the wires to be routed from the switch to
the device being controlled. The terminal end is for the switch and once the wire has been
routed, the extra length may be cut off and then terminated. Each kit has extra switches
and extra wires, which may be needed in your particular application.
The following chart is a guideline to what color wire is normally used for a particular
circuit.
Red; Battery power Orange; Accessory
Black; Chassis ground Yellow/White; Fuel pump
Purple; Starter solenoid Green; Fuel pump 2
Pink; Ignition coil Blue; Water pump
White; Accessory Gray/White; Electric fan relay
Tan; Headlights Brown; Tail lights
50313-18.doc
1
03-31-03
