63/78
06/02/2008
1.00
Options
Automatic dosing
With the automatic dosing, the system ensures that the right amount of cleaning agent is automatically taken
into the cleaning water. The alternation of cleaning products occurs automatically (see specific installation
manual on controls)
ECO-WASH
This is an automatic cleaning system that reduces the cleaning time to 50% of the
standard automatic
cleaning system. Another advantage is the reduction of the cold water consumption.
Manual cooling and cleaning
Your milk cooling tank can be equipped with timers that allow you to manually activate cooling, agitation
and cleaning in case of a break down of all automatic functions.
Separation of the rinse waters
With the standard drain valve, all the cleaning water runs into the sewer. A second drain valve can be fitted
to allow the milky water remains of the first rinse be piped to a separate drain.
Second dosage cup or third dosage pump
Using the second dosage cup or third dosage pump, allows you to add a disinfectant to the final rinse water.
Drain water detection
An extra sensor can be mounted to check if there is still water in the tank at the end of the cleaning cycle.
Hot water boiler
If a warm water boiler is installed the capacity required depends of the volume of the tank. Make sure you
install a boiler that gives enough warm water for both warm water cycles. E.g. 10000 liter tank, 200 liter of
warm water is needed; a boiler 25% more in capacity has to be installed to be sure enough water is available
for the main wash.
More information
If you would like more information about one of the options, please consult your after-sales department.
