PacketLight Networks PL-1000RO 3.3 Скачать руководство пользователя страница 117

Страница: 117 / 211

ONFIGURATION

ANAGEMENT

ACKET

IGHT

ETWORKS

PL-1000RO

3.3

NSTALLATION AND

ONFIGURATION

ANUAL

ONFIDENTIAL AND

ROPRIETARY

NFORMATION

LL RIGHTS RESERVED

AGE

103



In order to send traps to the management system, the PL-1000RO must have

a specific IP route. Therefore, if needed, add the management system address

to the

Static Routing

table (see

IP Tab

(p.

)).

To configure the SNMP configuration and traps:
1.

Click the

SNMP

tab.

The SNMP tab opens displaying the SNMP configuration and traps.

In the

SNMP Configuration

section, fill in the following fields as explained in

the following table.

Click

Apply

To send SNMP traps to a given management system:
1.

In the

SNMP Traps

section, fill in the following fields as explained in the

following table.

Click

Add

To stop SNMP traps from being sent to a given management system, click

Delete

in the corresponding line.

Table 34: SNMP Tab Parameters

Parameter

Description

Format/Values

SNMP Configuration

Read-Only Community String

The community string of the
SNMP

to be used for read

operations.

A string of alphanumeric characters
without spaces.
Default: read-only

Write-Only Community String

The community string of the
SNMP

to be used for write

operations.

A string of alphanumeric characters
without spaces.
Default: read-write

SNMP Trap Compatibility Format Determines the format of the

IfIndex that is sent with the
SNMP traps.

•

Port IfIndex Mode

: Used with

the legacy Network Management
System (NMS)

•

Full IfIndex Mode

: Used with

any other NMS.

SNMP Traps

Manager Address

The address of the
management system.

IP address
For example:

192.168.1.50

SNMP Traps

The SNMP trap format.

SNMPV2c, SNMPV1
Default: SNMPV2c

Community

The community string of the
traps.

public (default)

Trap Port

The UDP port number.

162 (default)

Содержание PL-1000RO 3.3



















































































































































































































Результаты поиска

Содержание PL-1000RO 3.3

Отзывы:

Бренды по названию

Популярные бренды

PacketLight Networks PL-1000RO 3.3, Руководство по установке и настройке

Результаты поиска

Содержание PL-1000RO 3.3

Отзывы:

Бренды по названию

Популярные бренды