12
Fig. 19:
Removing the system fan
2. Take out the system fan by removing the screws, located on the back of the
chassis, holding the system fan to the chassis.
Fig. 20:
Removing system fan screws
Removing the Motherboard
To remove the power supply unit, first remove the rear bezel (see section
), remove the left side cover (see section
),
remove all add-in cards (see section
), remove the CPU (see
section
), remove the
optional system fan (see section
); then follow the steps below:
1. Disconnect all power cables connected to the motherboard.
Fig. 21:
Disconnecting power cables from the motherboard
2. Remove any memory module installed (refer to the motherboard documentation for
Packard Bell Stella (iXtreme) Disassembly Manual
