Pacific Floorcare WDV-18 Скачать руководство пользователя страница 4

RETURN TO 

TABLE OF 

CONTENTS

- 1 -

SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER

WARNING: 

To reduce the risk of fire, electrical shock, or injury:

• 

Do not leave appliance when plugged in. Unplug from the outlet when not in use and before servicing.

• 

Do not use outdoors.

• 

Do not allow to be used as a toy. Close attention is necessary when used in the presence of children.

• 

Use only as described in this manual. Use only manufacturer’s recommended attachments.

• 

Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left 
outdoors, or dropped into water, return it to a service center.

• 

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. 
Do not run appliance over cord. Keep cord away from heated surfaces.

• 

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• 

Do not handle plug or appliance with wet hands.

• 

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything 
that may reduce airflow.

• 

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

• 

Turn off all controls before unplugging.

• 

Use extra care when cleaning stairs.

• 

Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. 

• 

Do not use without dust bag and/or filters in place.

• 

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• 

Connect to a properly grounded outlet only. See Grounding Instructions.

SAVE THESE INSTRUCTIONS

This machine is intended for commercial use.

When using an electrical appliance, basic precautions should always be followed, including the following: 

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for 

electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding 

conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded 

in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt circuit and has a grounding attachment plug that looks like the plug 

illustrated. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adapter 

should be used with this appliance.

WARNING

: Improper connection of the equipment-grounding 

conductor can result in a risk of electric shock. Check with a 

qualified electrician or service person if you are in doubt as 

to whether the outlet is properly grounded. Do not modify 

the plug provided with the appliance. If it will not fit into 

the outlet, have a proper outlet installed by a qualified 

electrician.

Содержание WDV-18

























Отзывы: