Pacific energy FP30AR, Инструкция по установке и эксплуатации

Страница: 43 / 48

Decorative Finish On The Front
The area shown around the front "Figure 49: FP30 Craftsman Front border area." on page 43 can be only
be finished with
non combustible materials only.
The area within the dashed line next to and below the Side Brackets cannot be thicker than 5/8” including
the non-combustible wall board. If there is anything thicker in this area, the decorative front will not be able to
mount on the brackets.
Raised Hearth
If you are installing a raised hearth
with this unit, it must be made
entirely of non combustible materials.
The maximum height for the hearth is
7” [178mm] from the base of the unit
(Figure 26).
1”
[25mm
]
2-1/4”
[57mm
]
1”
[25mm
]
47-1/2”
[1.21m
]
51-3/4”
[1.315m
]
Non-combustible facing materials only in this area
Side
bracket
Side
bracket
Figure 49: FP30 Craftsman Front border area.
Non-combustible Hearth
Maximum finished height:
7” [178mm] from base
of unit
Figure 50: FP30 Craftsman raised hearth height.
43
100000811_200418-48
FP30 Series B