Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/q5voip_manual.htm[3/17/2016 12:29:03 PM]
1.
2. Enter 51 then #
3. 1st segment, enter the characters then press # see
for keypad layout
4. 2nd segment, enter the characters then press # see
for keypad layout
CHAPTER
5
Operations
5.1 Call from the System
1.
Intercom Mode
: press #
2.
Call Forwarding Mode
: press 3 or 6 to scroll name then press # to call the selected name
5.2 Opening Door Remotely
Relay 1 (door 1), press 9
Relay 2 (door 2), press 8
5.3 Opening Door Using Access Code, Temporary Code, and Special Code
Access code Standard Operation is keyless entry code to open the door and door will be closed automatically, see
Temporary Code is used for limited number of times, maximum 10 times then the code will be expired, see
Special Code is used to unlock hold door and then use same code to lock the door, see
Press
*
(display will stop scrolling) then press the 4, 5, 6, 7 or 8 digit access code as programmed on
5.4 Opening Door Using Card, Temporary Card, and Special Card
The Quantum Q5VOIP/Q5VOIPFF has built-in card reader. The door can be access using UFOB, UCLAM or UISO.
Card Standard Operation is used to open the door and door will be closed automatically, see