System Operations Manual
www.paceworldwide.com
Page 8 of 50
i. Fully adjustable, precision, spring loaded board holder with top or bottom
PCB registration. Precise micrometer adjustment for X and Y adjustment
ensures placement accuracy for repeatability.
ii. Rugged, stable board platform to hold and support the PCB.
iii. Unique board holding fixtures that are able to hold very small and odd
shaped PCBs.
iv. Board supports are standard with the system.
v. Integrated, powerful, IR pre-heater with closed loop temperature control
ensures process integrity by delivering heat evenly, time after time.
4. Set-Up
a. Connect
i. The TF 1700 and TF 2700 come configured to use the internal air pump.
Both BGA Rework Stations may also be operated with an external N
2
Supply. Select air or (nitrogen) source using the drop down box on the
setup page.
Warning
: Do not operate the TF 1700 in N
2
mode unless N
2
supply is connected and on.
N
2
Connection
TF-1700 Software shown
