System Operations Manual
www.paceworldwide.com
Page 12 of 50
xvi. Temperature sensors. Tests active thermocouple circuitry.
xvii. Reset diagnostics. Must be clicked after any diagnostic test is performed
to reset the tests to default settings.
xviii. Run the activity log.
Figure 4b
Figure 4b shows the pre-heater indicator of the
TF 2700. This feature indicates which pre-
heater is on and the current temperature. To
turn on or off individual secondary pre-heaters
click on the graphic. While individual
secondary pre-heaters can be turned on and
off, they must all be set at the same
temperature. They can be adjusted by
dragging the yellow lines on the graph or
through the profile manager.
