background image

www.paceworldwide.com

Solutions and systems for soldering, r

ework and r

epair of electr

onics

www

.paceworldwide.com

Process Guide I-QFP-02

 

QFP Installation

Mini Wave

Equipment Required

PACE Intelliheat

®

 Power Supply

TD-100 Thermo-Drive

®

 Soldering Iron

Mini-Wave

®

 Tip (See Chart on Back)

Tip Tool
HP-65 HandiPik

®

Optional Equipment

Tweezer

Materials

Flux-cored Solder
Flux
Cleaner

Procedure

1.

  Set a tip temperature of 343°C (650°F) for lead-free 

or 316°C (600°F) for leaded alloys and adjust as 

necessary.

2.

  Install selected Mini-Wave

®

 tip into the TD-100 using 

Tip Tool.

3.

  Position the component ensuring proper lead-to-land 

alignment. Hold the component in place using the 
HandiPik

®

 or tweezers. 

4.

  Apply flux and tack solder opposing corner leads. 

5.

  Apply flux to ALL lead/land areas. 

6.

  Clean tip on Tip & Tool Stand sponge.

7.

  Apply solder to the cupped portion of tip to create a 

convex bead of molten solder. 

8.

   Position  Mini-Wave

®

 tip so the solder bead contacts 

the top portion of leads. Slowly move tip over one row 

of leads to form proper solder fillets at each joint. 

9.

  

Repeat steps 6 through 8 on remaining sides of 

component.

10.

   Re-tin  Mini-Wave

®

 tip with solder. Return TD-100 to 

its Tip & Tool Stand.

11.

  Clean, if required, and inspect.

A

A

B

C

Position Component

C

Flux Leads

B

Tack Lead

D

Fill Tip

© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly
(001) 910-693-8620 (USA) 877-882-7223

TD-100

D

E

E

Solder Component

Отзывы: