©2012 PACE Inc., Vass, North Carolina, All Rights Reserved
Page 3
Features
Arm-Evac 105 Central Filter Unit
1.
On/Off Switch
2.
75mm (3”) inlets/Lid
3.
Lid clasps
Fig.1
Arm-Evac 105 Central Filter Unit
Set up
1.
The Arm-Evac 105 has been designed for ease of use and maximum installation flexibility in mind. The
major considerations for placement of the unit are:
Exhaust Port:
This is located on the right side of the unit. When positioning the unit,
make sure that the exhaust port is not blocked or that airflow from the
exhaust port is not restricted in any way.
Proximity to work area:
The unit should be placed as close to the work area as possible. Do
not create any sharp bends in the flexible hose (sold separately), as
this will reduce airflow.
Unit Location
The filtration unit should be located so that it will not block
aisleways or impede normal operating traffic of material handling
pathways. It is important to position the unit in such a way that
allows for proper clearance to remove the lid and replace the filter
as needed.
2.
The Arm-Evac 105 will plug into either a standard 110v or 230v electrical outlet. The appropriate power
cord is provided with each system.
1
2
3
