Paccar PX-9, Руководство оператора

Страница: 74 / 97

1. Inspect for cracks, nicks, or other
physical damage.
2. Inspect for loose or missing
fasteners.
3. For rubber dampers, inspect for
damage to the rubber ring.
4. For viscous dampers, inspect for
leaks.
Engine Mounting Bolts
Perform these maintenance procedures
when indicated by the Preventative
Maintenance Schedule. Check for the
following:
1. Inspect both mount and leg
fasteners. Check for loose or
broken bolts. Replace as
necessary.
2. Check mount and leg for fractures,
breaks or deformation. Replace as
necessary.
3. Check for complete insertion of
motor mount. Replace as
necessary.
CAUTION
DO NOT re-torque or reuse existing
flange head bolts. These bolts are fac-
tory set to the specified torque. If bolts
are loose or damaged, they must be
replaced with the new bolts. Failure to
comply may result in equipment or
property damage.
Engine Identification
PX Engine EPA Label
The EPA label provides important details
about the engine. This label is located on
top of the engine valve cover (PX-7) or on
the front timing gear cover (PX-9). The
engine EPA label must not be changed
unless approved by PACCAR.
PX-9 EPA Label Location
Catalyst No.
Engine Identification
The engine dataplate contains information
specific to that engine. The engine serial
number (ESN) and control parts list (CPL)
provide information for service and
ordering parts.
ENGINE MAINTENANCE - Engine Identification
Y53-1185-1J1 (10/21) 71
2