Paccar MX-11 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 121

background image

Extended Life Coolant

Perform these maintenance procedures
according to the Preventative Maintenance
Schedule.

•

Conduct coolant maintenance
checks including freeze point, pH,
nitrite and carboxylate tests at least
twice annually to maintain engine
protection.

Nitrited Extended Life Coolant

For nitrited formulations (NOAT), a heavy-
duty extended life coolant that meets
ASTM D6210 and Caterpillar EC-1
specifications must be used.
Unless otherwise optioned, factory fill
coolant is an ethylene glycol, nitrited
organic acid technology (NOAT) extended
life coolant (ELC) formulation at a 50:50
coolant-to-distilled water mixture. The
factory fill exceeds ASTM D6210 and
Caterpillar EC-1 requirements. Maintaining
coolant chemistry and freeze protection is
critical to engine and cooling system
component health and longevity.
The change interval for extended-life
coolant containing nitrite and molybdate is
750,000 miles (1,200,000 km) or 12,000

hours of on-road use (8 years or 15,000
hours of off-highway use) on initial fill with
no extender added. The change interval is
1,000,000 miles (1,600,000 km)/20,000
hours/8 years with an extender addition at
500,000 miles (800,000 km)/10,000
hours/4 years.

Nitrite-Free Extended Life Coolant

Nitrite-free organic acid technology coolant
(OAT) may be used if it meets DAF 74002.
The change interval for nitrite free coolant
is 600,000 miles (1,000,000 km) or 6
years, with no extender needed. DO NOT
add coolant extender to nitrite-free coolant.
Follow the coolant supplier's drain/flush/fill/
diluting percentages when servicing a
vehicle filled with nitrite-free coolant.
Additional Recommendations:

•

Antifreeze is essential for freeze,
overheat, and corrosion protection.
The use of supplemental coolant
additives (SCAs) is not
recommended for extended-life
coolants.

Recommended Extended Life

Coolant Suppliers

Authorized PACCAR Engine dealer

®

Fuel Recommendations

WARNING

The  use  of  diesel  fuel  that  has  been
mixed  with  other  fuels  may  cause  an
explosion. DO NOT mix gasoline, alco-
hol,  or  gasohol  with  diesel  fuel.  Make
sure  you  know  your  fuel  source  and
use  the  recommended  diesel  fuel  as
indicated in this section of the manual.
Failure to comply may result in death,
personal  injury,  equipment  or  property
damage.

ENGINE MAINTENANCE - Extended Life Coolant

Y53-1166-1M1 (10/2020)

63

2

«
...
63
64
65
66
67
...
»

Содержание MX-11


























































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-11

Бренд: CG Страницы: 45

Бренд: WPT POWER Страницы: 39

Бренд: CESARONI Страницы: 6

Бренд: O.S. engine Страницы: 4

Бренд: panthera Страницы: 12

Бренд: Gaspar Страницы: 53

Бренд: Milwaukee Страницы: 43

Бренд: Milwaukee Страницы: 54

Бренд: Toyota Страницы: 185

3.5-1200 - V1.8

Бренд: MVVS Страницы: 2

Бренд: Ford Страницы: 26

Бренд: Mitsubishi Страницы: 26

Бренд: Sabre Страницы: 30

Бренд: Vetus Страницы: 80

Бренд: CRRCpro Страницы: 8

Бренд: 3W Страницы: 19

Бренд: Yanmar Страницы: 34

Бренд: Sammode Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды