Paccar MX-11 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 121

background image

This switch allows you to choose
progressively stronger braking to slow the
vehicle down.
Engine compression brake controls
include:

•

ON/OFF switch

•

Three-position selector switch

•

Clutch switch

•

Throttle sensor

•

Service brake pressure switch

•

Eaton Vorad® Anti-Lock Braking
System

Engaging conditions for the engine
compression brake:

•

Engine speed must be above 1,000
rpm.

•

Coolant temperature must be
above 59°F (15°C).

Deactivation conditions for the engine
compression brake:

•

Accelerator pedal is depressed.

•

Clutch pedal is depressed.

•

Engine speed falls below 800 rpm.

•

ABS control is active.

•

ECM recognizes a system
problem.

CAUTION

Operating  the  engine  with  a  compres-
sion  brake  that  will  not  automatically
deactivate  (i.e.  when  the  dash  switch
is  OFF,  clutch  pedal  is  depressed  or
throttle is applied) will cause severe in-
ternal engine damage. DO NOT oper-
ate  the  engine  if  the  compression
brake  will  not  deactivate.  Failure  to
comply  may  result  in  equipment  or
property damage.

Engine Compression Brake Level

Switch Operation

For the three-position engine compression
brake level switch, there will be 100
percent engine braking when the switch is
in the up (HIGH) position. In the middle
(MEDIUM) position, there will be 66
percent engine braking. In the down (LOW)
position there will be 33 percent engine
braking.
With the engine compression brake switch
ON, the engine compression brake will be
engaged when the service brake is
applied. If the cruise control is operated in
conjunction with the engine compression

brake, the engine compression brake will
engage to maintain the cruise set speed.

Engine Compression Brake on\off

Engine Compression Brake setting

Driving

Correct care of your engine will result in
longer life, better performance, and more
economical operation.
Follow the daily maintenance checks listed
in

Engine Maintenance

Check the engine oil pressure and engine
coolant gauges, warning lamps, and other
gauges daily to make sure they are
operational. Normally each gauge will

ENGINE OPERATION - Operating Instructions

18

Y53-1166-1M1 (10/2020)

1

«
...
18
19
20
21
22
...
»

Содержание MX-11


























































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-11

Бренд: FAZUA Страницы: 76

Бренд: Wacker Neuson Страницы: 44

Бренд: Kärcher Страницы: 224

Бренд: Admiral Страницы: 9

Бренд: PCM Страницы: 83

Бренд: Grizzly Страницы: 2

Бренд: O.S. engine Страницы: 15

Бренд: CAB Страницы: 16

Бренд: Dato Страницы: 9

Бренд: Clarke Страницы: 18

Бренд: YS Страницы: 2

Бренд: Detroit Diesel Страницы: 39

Бренд: Detroit Diesel Страницы: 122

Бренд: Detroit Diesel Страницы: 121

Бренд: Honda Страницы: 7

Бренд: WilTec Страницы: 11

Бренд: Honda Страницы: 48

Бренд: Honda Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды