JUMBO LOK P/N 1070 INSTALLATION INSTRUCTIONS
P
ERFORMANCE
A
DVANTAGE
C
OMPANY 10-2016
CAUTION
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* The bracket must be securely mounted to a stable surface and material.
* When mounting bracket to PAC TRAC aluminum products
P/N 7000
,
P/N 7020
,
P/N 7040
,
P/N 7050
with the included Trac Lok inserts
P/N 7016,
torque the screws to a maximum 15 in-lbs.
* PAC recommends regular and frequent inspections to be certain of proper operation and installation.
HORIZONTAL OR VERTICAL MOUNTNG
STANDARD MTG. HARDWARE QTY
FIGURE 1
(Thru Mounting Method)
FIGURE 2
(PAC TRAC Mounting)
¼-20 x 1-3/4 S.S.
Flat Head Screw
¼-20 S.S. Locking Hex Nut
TRAC LOK INSERT
2
2
2
PAC Fastener Packet P/N 7042
P/N 2092
P/N 2069LN
P/N 7016
For additional assistance call 888-514-0083 between 8AM-5PM EST or email: [email protected]
INS-1070 rev C
P/N 2022
#10-24 x 1-7/8 S.S.
Flat Head Screw
2
www.pactoolmounts.com
#10 S.S.
Flat Washer
2
P/N 2054
Page 1
PAC TRAC MTG. HARDWARE QTY
