Operating Instructions
P4720 Night Colors™
Congratulations on your purchase of the Night Colors™
LED Night Light. Please read these operating instructions
thoroughly before use. It is important for proper use of the
product.
With Night Colors™, you can experience a soothing multi-
colored light show in any room of your house. This
ingenious night light is equipped with LED lights that gently
change color—from red to pink, violet to blue, teal to green.
Have a favorite color? Simply choose the freeze mode and
Night Colors™ will remain in the chosen hue.
WARNING
! Designed for indoor use only. Do not use outdoors. !
! The unit is not waterproof. Do not place the unit where it will become
immersed in water. !
! The unit is not water resistant. Do not place in a damp or very humid
area. !
! Do not use if your hands are wet. !
! If the unit becomes cracked, broken, deformed or in any other way
damaged, discontinue use immediately. Discard or return for service. !
Installation:
•
Insert unit into standard 110 VAC household outlet.
•
When power is first applied, the unit will
not
respond to
presses. After a few seconds, mode selection
becomes active. This is to eliminate unintentional
mode changes when installing the unit.
•
Unit is designed to be oriented with the flat edge
downward. This provides a white down light effect for
lighting hallways and stairways.
•
If desired, it can be installed with the flat edge upward -
- washing the wall with white light.
•
Do not install the unit where it can be hit by swinging
doors, windows, or other household objects.
•
Do not install the unit in a floor-mounted outlet.
•
Do not install the unit at the end of an extension cord
or in any other location where it can be stepped on.
Use:
•
Unit features eight operation modes.
•
When initially powered, unit will start in mode 1.
•
Press momentarily on the face of the unit to select the
next mode.
•
Pressing the face in mode 8 will return to mode 1.
When power is first applied, the unit will
not
respond to
presses. After a few seconds, mode selection becomes
active. This is to eliminate unintentional mode changes
when installing the unit.
Mode Description
1
Normal cycle: Colors will cycle through all
combinations repeating every approx. 30
seconds. White down light on.
2
Freeze mode: Lock in your favorite color choice
from the normal cycle. White down light on.
3
Off: All LEDs extinguished.
4
White down light only: Only the white LED is lit,
illuminating your hallway, stairway, or washing
the wall with light.
5
Slow cycle: Colors will cycle through all
combinations repeating every approx. 120
seconds. White down light on.
6
Red: Pure red light. White down light on.
7
Green: Pure green light. White down light on.
8
Blue: Pure blue light. White down light on.
TIP
: Pressing the face of the unit will always change the
mode. It might not change the color. For example, Mode 2
will freeze the current color from the normal cycle.
TIP
: The light output of the unit is designed for night light
applications. For best results use in a darkened room.
TIP
: The normal cycle mode is automatically engaged
when power is applied. This is the most engaging and
active mode.
TIP
: If you get “lost,” cycles through the modes until the
LEDs are off (Mode 3). Then refer to the above mode
chart.
P3 INTERNATIONAL CORPORATION LIMITED WARRANTY
P3 INTERNATIONAL CORPORATION ("P3") warrants to the original retail purchaser only, that its
product is free from defects in material or workmanship under the condition of normal use and
service for a period of six (6) months from the date of purchase. In the event that a defect,
malfunction or failure occurs or is discovered during the warranty period, P3 will repair or replace
at its option the product or component part(s) which shall appear in the reasonable judgment of P3
to be defective or not to factory specifications. A product requiring service is to be returned to P3
along with the sales receipt or other proof of purchase acceptable to P3 and a statement
describing the defect or malfunction. All transportation costs shall be borne by the owner and the
risk of loss shall be upon the party initiating the transportation. All items repaired or replaced
thereunder shall be subjected to the same limited warranty for a period of six (6) months from the
day P3 ships the repaired or replaced product. The warranty does not apply to any product that
has been subject to misuse, tampering, neglect, or accident or as a result of unauthorized
alterations or repairs to the product. This warranty is void if the serial number (if any) has been
removed, altered, or defaced. This warranty is in lieu of all warranties expressed or implied,
including the implied warranties of merchantability and fitness for a particular purpose which are
expressly excluded or disclaimed. P3 shall not be responsible for consequential, incidental or
other damages, and P3 expressly excludes and disclaims liability for any damages resulting from
the use, operation, improper application, malfunction or defeat of any P3 product covered by this
limited warranty. P3's obligation is strictly and exclusively limited to the replacement or repair of
any defective product or component part(s). Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
P3 does not assume or authorize anyone to assume for it any other obligation whatsoever. Some
states do not allow limitation on how long an implied warranty lasts, so the above limitations may
not apply to you. It is the owner/user's responsibility to comply with local, state, or federal
regulations, if any, that may pertain to P3 products or their use. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
If you experience difficulty in the operation of your product, or if your product requires service
please contact:
P3 INTERNATIONAL CORPORATION
TECHNICAL SUPPORT
Email: [email protected]
Tel: 212-741-7289
Fax:
212-741-2288
rev.
04/04