19
MAN 9060983 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Repair and maintenance
Always ensure that the machine is switched off before carrying out any kind of
maintenance procedure.
Adjusting the brakes
The ATV has two front brakes and a rear brake.
WARNING – The brake can cause the wheels to skid and thus cause the rider to fall off.
Therefore practice using the braking function on a suitable area until you are
completely familiar with its operation and function. Avoid braking so hard that the
ATV skids as this can lead to accidents and damage to the tyres.
Loosen the nut and hold the cable in position and adjust the brake disc by rotating it,
cf. the desired tension. Next, re-tighten the nut securely.
Adjust the front and rear brake by
using a brake clamp.
Brake clamp