![P.Lindberg 9060212 Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/p-lindberg/9060212/9060212_original-manual_744959047.webp)
9
MAN 9060212 EN VI
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 7021 2626
DK-6600 Vejen
e-mail: [email protected]
1. Place a suitable container below the engine to catch the used oil, then remove the
oil filler cap/dipstick, drain plug and sealing washer.
2. Allow the used oil to drain completely, then reinstall the drainplug, and tighten it
securely. Please dispose of used motor oil according to local guidelines.
3. With the engine in a level position, add oil as described above. Engine oil capacities:
0.6L
4. Screw in the oil filler cap/dipstick securely.
Spark plug service
I
n order to service the spark plug, you will need a spark plug wrench. Recommended
spark plug: F7TC
NOTICE Incorrect spark plugs can cause engine damage.
1.
Disconnect the spark plug cap and remove any dirt from around the spark plug area.
2.
Remove the spark plug
3.
Inspect the spark plug. Replace it if the electrodes are worn, or if the insulator is
cracked or chipped.
4.
Measure the spark p l u g electrode gap with a suitable gauge. Correct the gap, if
necessary, by carefully bending the side electrode. The gap should be 0.70-0.80 mm.
5.
Install the spark plug carefully, by hand, to avoid cross-threading.
6.
After the spark plug seats, tighten with a 13/16-inch spark plug wrench to compress
the washer.
Содержание 9060212
Страница 2: ......