P.Lindberg 9055899, Руководство пользователя

Страница: 59 / 74

3
MAN 9055899 EN V1
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel: 70212626 DK6600 Vejen e-mail: salg@p-lindberg.dk
Safety Instructions
•
The equipment must be installed in a well-ventilated place and at such a height that
the heat from the equipment can be derived. Never block the vent and avoid high
temperatures.
• The equipment must be installed in horizontal position and avoid installing it in areas
with high vibration.
•
Keep the equipment dry to prevent short circuiting, which may cause fire and other
hazards. The equipment is not waterproof.
•
The equipment does not tolerate high weight loads, so do not place heavy objects on
top of it.
•
Always observe applicable national guidelines for installing the equipment.
Hard disk installation
The hard drive is already installed on delivery. If you need to change it, it is
recommended to use the original hard drive and make sure the power is turned off:
1. Loosen the four screws at the bottom and remove the cover.
2. Slide the hard disk into the bottom and make sure the holes are positioned correctlyr -
then screw the hard disk into the bottom.
3. Insert the hard disk and power cable.
4. Replace the cover and close it gently. Screw the cover firmly to the bottom.
Finished!