Reference this quick start guide to install and set up your new AIM Series Ozone Generator for service.
Please refer to the full manual (available online at ozotech.com) for additional information including main-
tenance and operating conditions.
1) Unpack & Inspect Components - Unpack the ozone generator, parts and accessories, and
compare to this packing list:
OZONE GENERATOR
Quantity
Item #
Description - Use
(1)
31334 or 31335
1000 Mg/Hr or 2000 Mg/Hr AIM Series Ozone generator
(1 or 2)
40155
50mm x 22 inch glass “Cool Tube” Corona Discharge Cell
(1 or 2)
44347-1
AIM series “Cool Tube” spring tension retainer
(1)
38001
115V AC power cord with plug
(1)
44073 & 44074
Power cord gripper grommet and nut
(2)
43230
Spare Fuses—3.15 Amp, slow blow
ACCESSORIES
Quantity
Item #
Description - Use
(1)
M43-31335
User Manual
(1)
T40-32001
Venturi Install and Care Guide
(1)
31011
BF1 - Back Flow Prevention Device
(60”)
44244-1
Ozone Resistant 1/4” ID tubing
(24”)
44141-1
Ozone Resistant 3/8” ID tubing
(1)
33258-01
Accessory Hose Adapter Kit, as follows:
(4)
44144
#2 Snapper Clamp - use with 3/8” OD hose
(4)
44134
#4 Snapper Clamp - use with 7/16” OD hose
(4)
44096
#7 Snapper Clamp - use with 1/2” OD hose
(6)
44071
#10 Snapper Clamp - use with 9/16” OD hose
(2)
44112
#14 Snapper Clamp - use with 5/8” OD hose
(3”)
44208
Ozone Resistant 1/2” ID x 5/8” OD tubing - use to step up tube size
(3”)
44095
Ozone Resistant 3/8” ID x 1/2” OD tubing - use to step up tube size
(2”)
44140
Ozone Resistant 1/4” ID x 3/8” OD tubing - use to step up tube size
(2)
46012
Ozone Resistant Tubing Insert 1/4” - use with soft or thin wall tubing
(4)
44249
Ozone Resistant Hose Connector 1/4” to 1/4” barb
(1)
44247
Ozone Resistant Hose Connector 1/4” to 3/8” barb - use to step up tube size
(1)
44248
Ozone Resistant Hose Connector 3/8” to 1/2” barb - use to step up tube size
(2)
47018-304
Ozone Resistant Check Valve 1/4” barb
Quick Start Guide
AIM BTU 1000 & 2000 Ozone Generator
