background image

RHD-1600

4.  OPERATING THE HAMMER DRILL

4   To start drilling squeeze 

the On/Off switch.

5    To stop drilling release 

the On/Off switch.

NOTE:

 PRIOR TO CHANGING MODES, THE ON/

OFF SWITCH SHOULD BE RELEASED AND THE 

DRILL SHOULD HAVE COME TO A COMPLETE 

STOP.

1   Choose  an 

operation mode:

Hammer Drill 

Rotate the side mode selector to the hammer and drill icon, 

and rotate the rear mode selector to the drill and hammer icon. 

This setting is recommended for use when drilling holes in 

concrete and other masonry products. The hammer action will 

be in operation while simultaneously the drill bit rotates.

Chiselling (Fixated) 

Rotate the side mode selector to the hammer icon, and rotate the rear 

mode selector to the drill and hammer icon. This setting is recommended 

for use when you desire a hammer action without the accessory rotating 

which is ideal for “chiselling or chipping” away at masonry products, pick 

or chisel accessory bits should be used. 

Note:

 This mode will stop the drill bit rotating completely.

Chiselling (Free Rotation) 

Rotate the side mode selector to the hammer icon with rotating arrow, and 

rotate the rear mode selector to the drill and hammer icon. This setting is 

recommended for use when you desire a hammer action without the drill 

action which is ideal for “chiselling or chipping” away at masonry products, 

pick or chisel accessory bits should be used. 

Note:

 This mode will allow the drill bit to rotate freely.

Drilling 

Rotate the side mode selector to the hammer and drill icon, and 

rotate the rear mode selector to the drill icon. This setting is 

recommended for use when you desire  the accessory to rotate 

without hammer action. Ideal  for drilling into timber or steel when 

correct accessories  for such materials are used.

OPERATION

2  Ensure your workpiece is securely clamped where possible.

3  Connect the tool to the mains power supply.

Отзывы: