13MM
HAMMER
DRILL
1010W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor:
1010W
Input:
230V ~ 50Hz
Chuck Size:
13mm (
1
/
2
”) Keyed
No Load Speed:
0-3,000/min
Impact Rate:
0-48,000bpm
Max Drilling Capacities: Timber 32mm
Steel
16mm
Masonry
13mm
Weight (Tool Only):
2.1kg
HDR-1100
WHAT’S IN THE BOX
Hammer Drill
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Depth Rod
22 x Drill Bits &
1 x Counter Sink Bit
27 x Driver Bits
Side Handle
0217
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of
36 months from the
original date of purchase
and is
intended for DIY (Do It Yourself)
use only.
If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: carbon brushes, depth rod, drill bits etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
Chuck Key & Magnetic
Bit Holder
5 x T
imber
Drill Bits
11 x Steel
Drill Bits
6 x Masonry
Drill Bits
5 x T
imber
Drill Bits
11 x Steel
Drill Bits
6 x Masonry
Drill Bits
5 x T
imber
Drill Bits
11 x Steel
Drill Bits
6 x Masonry
Drill Bits
