Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.
6. APPLIANCE CARE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
SPARE PARTS
Wear hearing protection
Wear eye protection
Warning
Regulatory Compliance Mark
(RCM)
V
Volts
Hz
W
Hertz
~
n
0
min
-1
Alternating Current
Watts
No load speed
Revolutions or reciprocations
per minute
bar
L
Pressure Rating
Litres
Read Instruction Manual
IP20
Sound power level
Ingress protection
96
Beware of electrical voltage
Warning! The equipment is remote
-controlled and may start up without
warning
Beware of hot surfaces
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
Storage & Transport
Pull the mains plug out of the socket and ventilate the appliance and
all connected pneumatic tools. Switch off the compressor and make
sure that it is secured in such a way that it cannot be started up again
by any unauthorised person. Drain the pressure tank.
Store the compressor only in a dry location which is not accessible to
unauthorised persons.
It is recommended that you drain the oil from the compressor if it will
be in storage for extended periods.
When transporting the unit, ensure it is kept level and upright. This
will prevent the oil from leaking and damage to the unit. Ensure it is
secured appropriately before transport.
Supply Cords
If the supply cord of this power tool is damaged, it must be
replaced by a specially prepared cord available through the service
organisation.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tool by an unauthorised person or
by mishandling of the tool.
