OZGENC MAKINA OMRM-133, Руководство пользователя

Страница: 10 / 42

page. 9 / 42
9 INSTALLATION
4. INSTALLATION
►
The equipment has passed working tests of all mechanic, electric and pneumatic units at factory.
All materials and the spare parts have passed the complete careful control before delivery in a
transport company.
►
At equipment acceptance make the control on availability/absence of any transport damages.
4.1 TRANSPORTATION INSTRUCTIONS
►
The machine should be standing upright and positioned centrally on top of a wooden pallet.
While the machine is situated on the pallet, position the forklift arms under the pallet between
the runners, keeping in mind that the machine is head heavy. Move the entire unit to an
accessible area as close as possible to the final location.
►
Carefully remove the packing frame surrounding the saw unit. Once completed, proceed by
elevating the machine away from the pallet base using a sling harness wrapped around the
cutting head of the saw. Ensure that the floor is as level as possible before finally positioning the
machine to the desired location.
It is forbidden to be under the machine during loading and unloading.
1. At loading to forklift it is necessary to avoid damage of cables, cylinders, hoses, filter-
regulator and control panels.
2. Means for moving should have dimensions corresponding for the machine.
3. Avoid blows of the machine tool in the course of moving.
4. Machine moving should be performed by a forklift.
4.2 REQUIRED WORKING AREA
►
For high-efficiency work of the machine it is recommended to place the machine in workshop
with maintenance of indicators of the distances indicated by the manufacturer. A – B the placings
shown on the plan, it is necessary to keep plots the free. The minimum recommended distance
from the uppermost point of the machine tool to a ceiling constitutes 2 mt.
Picture 4.2-1 Required Working Area
500
mm
А
2000
mm
B