OZGENC MAKINA OMRM 113, Руководство по эксплуатации

Страница: 66 / 110

OMRM 113 User Manual
71 | P a g e

Cutting angles are determined using buttons located under tabs called "Fixed Head" and
"Movable Head" located in manual operation mode

Click the button under the selected unit once depending on the unit(s) you want to (fixed and
movable head) to 45 or 90
°
.
10.13.2 Cutting in Manual Cutting Mode

Switch the machine on
Note! Remember that movable and fixed cutting units are automatically moved only to
45 and 90
°
.
Click the buttons on the side
to move both fixed and
movable units from 45° to
90°
Both fixed and movable
heads are tilted to 45° as
shown on the side. Click
buttons inside the rectangles
on the side to move heads
to 90° once.
Both fixed and movable
heads are now in 90°