OZGENC MAKINA OMRM 113, Руководство по эксплуатации

Страница: 21 / 110

OMRM 113 User Manual
23 | P a g e
6.7 Lighting Conditions
Operator must use the equipment with proper lighting conditions for his/her safety and health.
Minimum lighting power must be 300 lux for machine use. For more technical information,
please see EN 12464-1 Lighting Norm.
6.8 Connections
All necessary connections must be prepared at the layout site in line with the machine. Electrical
power, pneumatics or similar demands must be at values meeting requirements, and
compatible equipment must be kept available at the layout site. Take IEC 64-8 norm into
consideration for the installation of electrical equipment.
Note: Should the system is equipped with a power supply, then it must have a 0.3A circuit-
breaker and start-up procedures must be performed by experts.
6.9 Earthing Requirements
Earthing system must conform to standard features described in IEC 64-8. It must be
compatible with IEC64 and IEC364 norms for low-voltage equipment. Earthing procedures must
be performed in consideration of the voltage value. A stands for the marked point earthing inlet.