4 • Oz Charge manual
www.ozcharge.com.au
ELECTRICAL PARTS & ACCESSORIES:
AC Power Cord:
1.8m with SAA 3 Pin AU Plug
DC Output Lead:
1.2m with quick connect
Charging Leads:
Quick connect 60cm Crocodile Clip Harness
TECHNICAL SPECIFICATIONS:
Model Number
OC2406U
Output
6A @ 24V
Input Voltage
220-240Vac / 1.8A(175W)
Input Frequency
50/60Hz
Charge Voltage
Gel - 28.2V
AGM&WET - 28.8V
Calcium - 29.4V
Equalising Voltage
Gel - 28.6V
AGM&WET - 29.2V
Calcium - 31V
Float Voltage
27.2V
Start Voltage
5V
Operating Temperature
-15 to 50° C
Storage Temperature
-25 to 85°C
Operating Humidity
90% RH Max.
Size (L*W*H)
214mm x 103mm x 55mm
Weight
1.1kg
Approvals
CE, UL/cUL, AS/NZS, EMC
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (Not required on sealed & maintenance free batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway between
the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible and to
determine which Battery Type and Charge Rate settings you will use.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
