5 • Oz Charge manual
www.ozcharge.com.au
STEP 2 - Connecting the battery charger to your battery
•
Simply push the round charger plug into the battery charge socket of your
wheelchair or mobility scooter, ensuring the pins are not stressed and lined up
straight and correctly.
STEP 3 - Connect the battery charger to AC mains (230-240Vac) power and turn ON
•
Switch the AC power ON and the battery charger will automatically start.
(Note: If the Fault Indincator LED illuminates or flashes Red, please check your
connections.)
STEP 4 - Disconnecting the battery charger from battery
•
Switch the AC power OFF.
•
Disconnect the battery charger from the battery charger socket.
Note: The charger has been designed to be left turned on and switching the charger on-
off to connect/reconnect is not necessary.
LED STATUS INDICATOR TABLE:
LED
Status
Description
Charging Status LED’s
Full Green
Flash/ON Flashing if Analysis failed or ON if fully charged - Float / Maintenance mode
Absor. Green Flash/ON Flashing during equalisation charging or ON during Absorption charging
Bulk Blue
Flash/ON Fast Flash - Rejuvenation / Slow Flash - Soft Start charging / ON - Bulk charging
Fault LED
Red
ON
Short circuit/reverse polarity or Rejuvenation failed if Bulk LED also flashing slow
Red
Flashing
Over temperature protection mode / Soft start charging timed out if Blue Bulk
LED also flashing fast / Bulk charging timed out if Blue Bulk LED also ON
