Model: OC-RDP
Congratulations on purchasing the Oz Charge OC-RDP - Remote Display to suit the OC1225U or OC2412U Battery Charger, Maintainer and Power
supply. This product is designed to work in conjunction with the OC1225U or OC2412U so please familiarise yourself with the product manual of
the OC1225U or OC2412U before using this product as this manual assumes a prior understanding of the OC1225U or OC2412U.
The OC-RDP is an optional accessory which connects to your OC1225U or OC2412U Battery Charger which allows you see the charging status
and condition of your battery. It also contains a clock (24hr mode), displays battery voltage, charge current, Ah in and temperature.
This remote display controls the same features as the buttons do on your OC1225U or OC2412U Battery Charger.
REMOTE DISPLAY FEATURES
1.
Indicates whether the unit is in Charger Mode or Power Supply Mode.
2.
Indicates which Battery Type has been selected. (IMPORTANT. Make sure this is showing your type of Battery)
3.
Charging Status / Progress Bar - Battery Level indicator. (Based on voltage only and not Ah capacity)
4.
Charge Rate button - Press to View / Change the Charging Current Output. (2A, 15A, 25A) Note: In 2A & 15A mode the fan is disabled.
If you press and hold this button for 3 seconds it will also activate and deactivate PWR SUPPLY mode.
5.
Mode Select - Press to change view.
- STANDBY MODE (No AC Power Connected) - CLOCK - TEMPERATURE - BATTERY VOLTAGE
- CHARGE MODE - CLOCK - TEMPERATURE - BATTERY VOLTAGE - CHARGING CURRENT - CHARGING AH
- PWR SUPPLY MODE - CLOCK - TEMPERATURE - OUTPUT VOLTAGE - OUTPUT CURRENT - OUTPUT WATTAGE
6.
Battery Type button - Press to select your battery type. Please ensure the correct battery type is selected to suit your battery type.
If you press and hold this button for 3 seconds it will also activate and deactivate REJUVENATION mode. Indicated by charge status scrolling.
7.
Units Measurements - Displays appropriate measurement symbol depending on mode/view selected.
8.
Fault Icon - Indicates a fault with the Battery or Charger. Refer to fault codes below.
9.
Fan Disabled symbol. If this is on it means the Fan has been disabled. (Quiet mode) The fan is disabled in 2A & 15A Charge Rate mode.
10.
Charging Status - Indicates the charge stage status. (If both Bulk & Absorption are flashing, this indicates Equalisation Stage.
11.
Displays battery health status. Happy Face - Battery Voltage is over 12V(24V) and no deep discharges have occurred.
Sad Face - Battery Voltage has dropped below 12V(24V). If the batteries have been deeply discharged to below 11.5V(23V), the Sad Face
will remain until the batteries have been recharged. Once voltage reaches 13.8V (27.6V) for at least a minute the Happy Face will return.
The Sad Face will also appear if the batteries haven’t received charge for 2 weeks. Once again the voltage must reach 13.8V (27.6V) for at
least a minute for the Happy Face to return.
The features controlled by the Charge Rate and Battery Type buttons on this remote display are explained in your OC1225U/OC2412U Owners Manual.
Setting the Clock (24hr mode only) - Note: Battery must be connected. To change or set the time on the Clock, press and hold both the Charge
Rate & Battery Type buttons down for 1 second. Once the minutes starts flashing, use the Charge Rate and Battery Type Buttons to adjust the
minutes up and down. Press the Mode button to select hours and once this starts flashing use the Charge Rate and Battery Type Buttons to
adjust the hours up and down. Once the time is set, wait 5 seconds and it will exit the time setting function.
Note: The Remote Display will automatically Dim after 1 minute and will turn completely off after a further 2 minutes. To turn the display back
on, simply press any button to wake it back up. Please always check the correct Battery Type is selected when in Charger mode.
If you’re not sure of your Battery Type, please refer to the manufacturers specifications for your Battery.
Model: OC-RDP
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
DISPLAY CODES / FAULT CODES
Eco - Unit is in power saving mode. No battery detected.
CoSP - Output leads are short circuited.
CtoP - Charger has timed out.
CotP - Over temperature protection mode.
Cbcd - Charger has detected a bad/failed battery cell.
PrcP - Output leads are short circuited in power supply mode.
PoPP - Over power protection mode.
Lobt - Low Battery Voltage - Below 8V.
SPECIFICATIONS
Operating Voltage: 12V / 24V
Power Consumption: LCD Off - 7mA(Max.) / LCD On - 40mA(Max.)
Display Dimensions: 115.7mm (W) x 75.7mm (H) x 13.2mm (D)
Weight: 200g (Approx.)
Cable length: 5m
>12.6V (>25.2V) - 100%
12.38V-12.60V (24.76V - 25.2V)
12.26V-12.48V (24.52V - 24.96V)
12.14V-12.36V (24.28V - 24.72V)
12.02V-12.24V (24.04V - 24.48V)
11.90V-12.12V (23.80V - 24.24V)
11.78V-12.00V (23.56V - 24.00V)
11.54V-11.76V (23.08V - 23.52V)
11.66V-11.88V (23.32V - 23.76V)
<11.54V (<23.08V)
Battery Voltage
>12V (>24V)
Battery Voltage
<12V (<24V) or has
been deeply discharged
or hasn’t received a
charge for 2 weeks.
BATTERY LEVEL INDICATOR (AC Power OFF)
